First X-ray image
This is the first x-ray image I produced. A garage door opener is used to turn on the filament heater and the high voltage suppy. Then the camera is triggered remotely with a shutter speed of 1 or 2 seconds. Weiterlesen…
This is the first x-ray image I produced. A garage door opener is used to turn on the filament heater and the high voltage suppy. Then the camera is triggered remotely with a shutter speed of 1 or 2 seconds. Weiterlesen…
This charger failed and I wanted to check what’s the reason and if it could be fixed easily. Unfortunately I cannot read the marking on that SO chip. Also it’s very likely that another failed component cause the explosion of Weiterlesen…
Some of the few good pots from this glaze firing…
I wanted to do some high voltage experiments which leads to the need of a high voltage transformer. It seemed to make sense to build the case from aluminium and fill the whole thing with oil. The core is a Weiterlesen…
Instead of having gas hoses attached directly to the burners I changed to copper pipe. I also added a ball shut off valve and two needle valves. While I was at it I also replaced the pressure regulator. The new Weiterlesen…